SpiroPlay

Version 1 date 04.2024

SPIRO-metry based PLAY-ful asthma monitoring. Spiroplay is a game that motivates children to conduct valid asthma breathing tests in the comfort of their own homes. The breath test is gamified using co-design based levels, where inhalation, exhalation, and peak flow are visualised in playful ways. The results are analysed by medically validated algorithms can be sent to doctors, while the child receives a simplified version of feedback: 'Good job! Next time, try inhaling for a little bit longer.

You will need the following:

• PC (For software installation)
• Android Device (Tablet is better, but Phone is possible)
• NuvoAir Spirometer
• FlowMir Turbines

The software has been preinstalled on tablet HMI-029.

In this step, you will install two APK files onto an Android device. The apps are called “SpiroPlayFrontend” and “SpiroPlayBackend.”

Firstly, connect the PC to the Android Device using a USB cable.

A PopUp will appear on the tablet, asking for the USB connection method. Select the Transfer files options.

On the PC, navigate to the Tablet's drive on File Explorer and enter the APKs Folder ()

Copy the two APKs (SpiroPlayFrontend and SpiroPlayBackend) from the PC to the APK folder. You can now disconnect the PC.

On the tablet, enter File Manager and navigate to the APKs Folder. Locate the two APKs and click on them once to install them. After installation, they should appear on the Tablet's application list.

Firstly, make sure both Bluetooth and Location are enabled on the Tablet.

- Connect tablet to NuvoAir (breath tester for asthma) (Bluetooth and Location need to be enabled)

- First launch Backend (It should search for Bluetooth devices; upon connection, NuvoAir should light up)

- After connection, press launch game to start frontend

After launching the app, a few key features can be used.

Select the option to Create a new user profile. This can be done for each subject.

Enter a name, and fill in the FVC and PEF parameters. FVC is the measurement of lung volume and is approximately 6 litres. PEF is for peak flow rate and is usually 8 litres/second.

Entering developer mode lets you unlock all levels immediately, as well as giving you access to user logs, data, etc.

In order to enter developer mode, tap 5 times at the rightmost tree on the main screen.

By pressing the X Button, you can enter the level manager and unlock all levels by X.

By pressing the X button, you can see a user's history, which shows all the technical information that will be useful to doctors.

When playing a game, each person should have their own turbine for the NuvoAir, as they are 1 use per person. They can be found in the Interaction Lab storage

In each level, the Inflow (total volume), Outflow (total volume), and Peak Flow are all visually represented. For example, in the X game… These designs for each game were done by children, so the representations may not be 100% clear.

Playing games is rewarded by gaining coins, which can be used to unlock new levels.

If wanted, the announcer's voice can be changed on the home screen by selecting the “Change voice” button.